Page 392 - Chief Architect Reference Manual

Chief Architect X10 Reference Manual

the outside of its Main Layer. See “The • Uncheck Automatic Facet Angle to
Main Layer” on page 383. specify the Facet Angle, which is the
• Select Main Layer Inside to measure the angle at which the surfaces of the curved
radius from the wall’s center point to the wall are broken in 3D views. The default
inside of its Main Layer. value is 7.5°; a smaller value produces a
smoother curve but may take longer to
• Select Inner Surface to measure the generate in 3D views.
radius from the wall’s center point to its
inner surface. 4 If the selected wall has any Copyright
information associated with it, it will
• Specify the selected wall’s Radius, as display here.
defined by the radio button selected
above. 5 A preview of the selected wall,
• Select Arc Center to move the selected including any doors, windows, and/or
wall’s ends and prevent its center point fireplaces inserted into it, displays on the
from moving when its Radius is changed. right. If the selected wall is specified as
Invisible, its plan view will display here by
• Select Ends to move the selected wall’s default. See “Dialog Preview Panes” on page
center point and prevent its ends from 42.
moving when its Radius is changed.

Structure Panel

The settings on the STRUCTURE panel control
the height and other structural attributes of
the selected wall(s).

392