Page 440 - Chief Architect Reference Manual

Chief Architect X10 Reference Manual

the Floor Finish Definition dialog and log and define the layers of materials that
define the layers of materials that form form the floor platform. Check Default to
the finished floor surface. Check Default use the Floor Structure Definition set in
to use the Floor Finish Definition set in the current floor level’s Floor Defaults
the current floor’s Floor Defaults dialog. dialog. See “Material Layers Definition
See “Material Layers Definition Dialogs” Dialogs” on page 1001.
on page 1001. • If the selected room is a Deck, the Floor
• Specify which part of the floor platform Structure button will be labeled Planks,
moves On Structure Resize. Select Lock Joists instead. See “Decks” on page 424.
Floor Top to keep the top of the floor • Check the Default box to the right of
structure at the same height and raise or either button to restore the default struc-
lower its bottom when the platform depth ture and/or finish.
is changed. Select Lock Floor Bottom to
keep the bottom of the floor structure at
the same height and raise or lower the top Note: The default floor and ceiling platform
when the depth is changed. and finish definitions for rooms are set in the
current floor’s Floor Defaults dialog. In the
• The Floor Structure depth displays here Floor Defaults dialog, the defaults are drawn
for reference. Click the Edit button to from the Normal Room Defaults dialog. See
open the Floor Structure Definition dia- “Floor and Room Defaults” on page 413.

Deck Panel

The options on the DECK panel are only The settings on this panel are also found in
available for rooms designated as Decks, and the Deck Room Defaults dialog, but affect
control how deck planking and joists are the selected Deck room(s) only rather than
generated. See “Deck Framing and Decks as they are initially created. See
Planking” on page 425. “Room Type Defaults” on page 413.

440