Page 585 - Chief Architect Reference Manual

Window Specification Dialog

• Click the Clear button to remove a on each side; when it is unchecked, it will
selected sill profile from the window. be the same length as the sill.
• Specify how far to Extend the sill past the Check Use Exterior Sill to enable the
outside edges of the casing on each side. 2 settings that follow, then specify the
If an Apron is specified, it will also be exterior sill for the selected window(s) using
affected by this setting. these settings. These settings are the same as
• Check Wrap to wrap the sill profile back those for the Interior Sill.
toward the wall. A preview of the selected window
3
• Check Apron to include an apron under displays here. See “Dialog Preview
the sill. When Wrap is checked, the apron Panes” on page 42.
will be 1/2” (12 mm) shorter than the sill

Sash Panel

The settings on the SASH panel control the The SASH panel is not available in the Wall
size and position of the selected window’s Niche, Mulled Unit, and Window Symbol
sash. Note that increasing the Side, Middle, Specification dialogs, and the settings on
Top or Bottom Width decreases the area of this panel are not available for Pass-
the glass and vice versa. Throughs.

1 Specify the width and depth of the • Specify the Side Width of all vertical
selected window’s Sash, which are the sash members: those at the window sides
pieces of the window that hold the glass. as well as the central members of Case-

585