Page 260 - HILTI
P. 260
Anchors Systems
Anchor rod HIT-V 8.8
Key applications and advantages Technical data
■ Suitable for fastenings in masonry in Anchor type Off-the-shelf rods
conjunction with Hilti HIT-HY 70
Head configuration Externally threaded
■ For embedment depths of 4x - 20x rod
diameter Environmental Indoor, dry conditions
conditions
■ Flexibility: approved embedment depth
between 4 to 20 times rod diameter al- Type of fastening Pre-fastening,
Through-fastening
lows shallow fastenings in thin concrete
slabs or walls Material Steel, 8.8 grade,
composition zinc-plated (min. 5 µm)
■ Productivity: use of optimum rod length
and diameter saves time and money in Installation All
each fastening job direction
PROFIS software Yes
Material, corrosion Steel, zinc-plated
In-service tempera- -40 °C
ture - min.
Ordering designation Anchor Base plate Required Wrench size Anchor length Useable Standard Package contents Sales Item number
size clearance tightening thread length embedment pack
hole torque depth quantity
HIT-V-8.8 M8x150 M8 10 mm 10 Nm 13 mm 150 mm 135 mm 80 mm 1x Anchor rod 20 pc 387056
HIT-V-8.8 M8x150 assy
HIT-V-8.8 M10x190 M10 12 mm 20 Nm 17 mm 190 mm 173 mm 90 mm 1x Anchor rod 10 pc 387059
HIT-V-8.8 M10x190
assy
HIT-V-8.8 M12x220 M12 14 mm 40 Nm 19 mm 220 mm 201 mm 110 mm 1x Anchor rod 10 pc 387062
HIT-V-8.8 M12x220
assy
HIT-V-8.8 M12x280 M12 14 mm 40 Nm 19 mm 280 mm 261 mm 110 mm 1x Anchor rod 10 pc 387063
HIT-V-8.8 M12x280
assy
HIT-V-8.8 M16x380 M16 18 mm 80 Nm 24 mm 380 mm 357 mm 125 mm 1x Anchor rod 5 pc 387067
HIT-V-8.8 M16x380
assy
Anchors
Standard anchor rod for use with injection HIT-V-F (5.8
hot-dip galvanized)
Key applications and advantages Technical data
■ Suitable for fastenings in concrete in Anchor type Off-the-shelf rods
conjunction with the relevant Hilti HIT
Head configuration Externally threaded
injectable adhesive anchoring systems
■ Suitable for fastenings in masonry in Environmental Indoor, damp condi-
combination with Hilti HIT-HY 70 conditions tions, Outdoor
■ For embedment depths of 4x - 20x rod Type of fastening Pre-fastening,
Through-fastening
diameter
Material Steel, 5.8 grade, hot-dip
■ Flexibility: approved embedment depth galvanized (min. 43 µm)
between 4 to 20 times rod diameter al- composition
lows shallow fastenings in thin concrete Installation All
slabs or walls direction
■ Productivity: use of optimum rod length PROFIS software Yes
and diameter saves time and money in Material, corrosion Steel, sherardised / hot-
each fastening job dip galvanised
In-service tempera- -40 °C
ture - min.
Ordering designation Anchor size Base plate clearance hole Wrench size Anchor length Useable thread length Package contents Sales pack Item number
quantity
HIT-V-F-5.8 M10x95 M10 12 mm 17 mm 95 mm 78 mm 1x Anchor rod 10 pc 409551
HIT-V-F M10x95
assy
HIT-V-F-5.8 M10x115 M10 12 mm 17 mm 115 mm 98 mm 1x Anchor rod 10 pc 409552
HIT-V-F M10x115
assy
www.hilti.group 251