Page 14 - FreesStyler® Installation and Startup
P. 14

®
            INSTALLATION AND STARTUP


            Chapter 1 Introduction


            Greetings


               This Introduction Section is Intended to:
                       •  Address the installation portion only.

                       •  Help you to understand how the installation manual is organized.
                       •  Encourage planning and organization.

                       •  Safety Issues.
               Owners Manual

                This manual covers installation, Startup and Maintenance.

               How the Manual is Organized
                The installation manual starts off with a "punch list" of activities that must be performed during
                the installation phase. The list is fairly comprehensive, and provides somewhat of an order in
                which the tasks should be completed to minimize installation time.
                One section of the installation manual is concerned with initial startup. Again, a checklist format
                is provided to walk one through starting up the machine that has just been installed. The last
                section includes Repair, Maintenance and Exploded Parts.

               Planning and Organization
                Planning and organization are the most important ingredients for a timely installation. At this
                point  much  of  the planning should have already been done. For example, your Belanger
                Representative may have already visited the site. Measurements were taken, and quite possibly
                drawings produced showing equipment locations.
                The installation manual assumes  that  these items have been thoroughly looked at. If they
                haven't, now is the time to do so. For your convenience, the "Getting Started" section reiterates
                some of the critical points and primary equipment placement.

               A Final Word on Safety
                The job site can be a hectic place. Often deadlines control the pace. Please keep in mind Job
                Site Safety at all times. Proper use of all safety gear (safety glasses, hard-hats,  footwear,
                shields, guards, etc.) is imperative. Be  aware of electrical concerns (exposed conductors,
                extension cords, proximity to water, power tool maintenance, etc.). Rigging (fork lift operation) is
                another concern. Minimize slip, trip, and fall potentials consistently. In short, be aware of OSHA
                considerations, in addition to rules and regulations put in place by your local authorities.





















             1-6       Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681         1MANUL220
   9   10   11   12   13   14   15   16   17   18   19