Page 15 - FreesStyler® Installation and Startup
P. 15
®
INSTALLATION AND STARTUP
Chapter 1 Introduction
Torque Values
The following is a chart showing the torque values for Grade-5 and Stainless Steel Grade 8-18
fasteners, which are both used on the FressStyler® system.
Information provided by Engineers Edge
Torque Values = FT - lbs
SAE Grade 5 120,000 Stainless Steel
PSI Med. Carbon Heat 18-8
treated steel
Coarse
Bolt Size Torque Values Torque Values
Inches Threads/Inc (FT*LBS) (FT*LBS)
h
#10 24 NA 2
1/4 20 10 6
5/16 18 19 11
3/8 16 33 20
7/16 14 54 31
1/2 13 78 43
9/16 12 114 57
5/8 11 154 93
3/4 10 257 128
7/8 9 382 194
1 8 587 287
1 1/8 7 794 NA
1 1/4 7 1105 NA
1 3/8 6 1500 NA
1 1/2 6 1775 NA
1 5/8 5.5 2425 NA
1 3/4 5 3150 NA
1 7/8 5 4200 NA
2 4.5 4550 NA
Bolt Torque Factors
LUBRICANT OR PLATING TORQUE CHANGES
Oil / Anti-sieze Reduce torque 15% to 25%
Dry Film (Teflon or moly based) Reduce torque 50%
Dry Wax (Cetyl alcohol) Reduce torque 50%
Chrome plating No change
Cadmium plating Reduce torque 25%
Zinc plating Reduce torque 15%
Information provided by raskcycle.com
Torque values should be reduced if using lubricants such as anti-seize.
1MANUL220 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 1-7
