Page 176 - FreesStyler® Installation and Startup
P. 176
®
INSTALLATION AND STARTUP
Chapter 9 Optional “Add-On” Items
Wheel Cleaning and CTA Options
Deluxe Wheel Stinger with On-Board CTA Installation
7) Using two of the 1/4-20 x 5/8” fasteners attach the On-Board CTA Bracket to the On-
Board Manifold Mount located about 14” from the bottom of the Stinger Manifold
Weldment.
Note: The On-Board CTA Bracket should be positioned on the entrance side of the water
manifold and with the bend oriented toward the center of the FressStyler®.
8) Locate the supplied 1/2” poly-tube (natural) and 1/4” poly-tube (black). Secure them to
the fittings shown below. Route the two hoses along with the feed from the Photo Eye up
the manifold using the supplied wire-ties to secure them to the manifold also shown
below.
9-44 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL220