Page 69 - Kondor® KL 1 - E-1063 Programming and Operation Manual
P. 69
®
KL1: 1063 PROGRAMMING AND OPERATION
Chapter 7 Network and E-mail
Activate Network Screen
Dip Switch Settings
On the back of the 1063 module, change the setting of dip switch #1 to the ON position. See the
image below.
Then cycle the power.
Network Startup Screens
Once the power has been cycled, the screen on the lower-left will appear. Touch the screen
anywhere before it times out (approximately 7 seconds).
If it times out you will have to perform the calibration before configuring the network settings.
The Calibration screen is shown on the lower-right.
1MANUL126 Belanger, Inc.® * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681 7-19
