Page 45 - Airblade® Dryer - Mix and Match
P. 45
AIRBLADE® DRYER Mix and Match
Installation
4-Nozzle “Select” Frame Assembly: Floor Mounted
Side Kick® Side Nozzles
9) Rotate the Housing Assemblies to the positions shown below. Once properly positioned,
tighten them into place.
18° 18°
The rotation angles are starting points. Your
site may require a different position depending
on your site-specific cleaning requirements.
Whenever making adjustments to the
recommended starting points, be sure to
maintain adequate vehicle width clearance.
Driver Side Passenger Side
10) Once properly positioned, tighten them into place.
11) Locate the supplied black plastic end caps and secure them into place as shown below.
End Cap
1MANUL011 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (810) 349-7010 * Fax (810) 380-9681 41
