Page 42 - Airblade® Dryer - Mix and Match
P. 42

AIRBLADE® DRYER Mix and Match



             Installation


             4-Nozzle “Select” Frame Assembly: Floor Mounted

                Side Kick® Side Nozzles

                    3)  Attach the Leg Pivot Assemblies to the inside of the upright legs as shown below. Do not
                       fully tighten into place until positioned at the height shown in the following step.






















                    4)  Secure the Leg Pivot Assemblies at 88” from the floor. The 88” dimension is taken from
                       the floor to the top of the Motor Mount Plate.















                                88”











                       The above stated height is a starting point. Your site may require a different position
                       depending on your site-specific cleaning requirements. Whenever making adjustments to
                       the recommended starting points, be sure to maintain adequate vehicle height and width
                       clearance.





              38                              Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (810) 349-7010 * Fax (810) 380-9681                                          1MANUL011
   37   38   39   40   41   42   43   44   45   46   47