Page 32 - Low Side Washer
P. 32
LOW SIDE WASHER
Installation
C-Channel Cleaning Material
1) Remove the plastic shaft cover shown below (if applicable).
Plastic Shaft Cover
2) Mount the 12” diameter x 28-1/4” tall hub so that the top is 36” from the Conveyor surface on the
driver side by securing the “Spider” Clamps to the shaft and securing the “Skins” to the Spiders as
shown below. Be sure that the open ends of the “C” channels are facing upward.
Spider assembly flush to top of hub Open end of “C” Channel
36”
Skin (typical)
Spider (typical)
Floor
3) On the passenger side, mount the 12” diameter x 28-1/4” tall hub at 36” from the floor while the
hub is 60” from the inside Guide Rail.
60
28 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL858