Page 33 - Tunnel Support Components

TUNNEL SUPPORT COMPONENTS

Installation

Solution Delivery Module (SDM) General

Dimensions
33” tall 34” wide 14-1/2” deep
This section will explain the features of the SDM. Some items may differ from your site. See you site specific
prints for details.

Overview
Each water valve requires a channel from one of the Output Modules. All water valves can be used on
either the front or rear manifold of the SDM panel and can be moved from front to rear at any time. They
are also interchangeable as long as the appropriate style is being used for a specific duty.
A single SDM can have as few as 4 water valves or as many as 8. Additional water valves can be easily
added at anytime as long as there is room on the manifold to accommodate them.
Each bank of water valves can be supplied with different types of water, (fresh, reclaim or hot water).
Note: Foamer Style Water Valves are designed to use only fresh water.

Water manifold
The SDM has a dual manifold (front and rear). Typically for fresh and reclaim water. It can be supplied
from either end.
Depending on your specific system configuration, a system can have as few as 3 pumps or as many as 5
pumps mounted on a single SDM frame.
In a case where more than 5 chemical pumps are required, they will have to be mounted on a separately
purchased SDM frame. If you have questions about your configuration, contact your distributor.

Wall

Rear Water Feed
Front
Water Manifold Water
Feed

Overhead View

1MANUL760 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 31