Page 10 - Twin Wave Mitter™

®
TWIN WAVE MITTER

Specifications

Requirements
Physical
Tunnel space required 72” minimum
Unit height 123”

Unit width 146”
Utility
Electrical 110VAC
Hydraulic 6 GPM @ 900 PSI
Pneumatic .3 CFM @ 90-PSI minimum 120-PSI maximum

Water (2) 3/4” pipe @ 6 GPM @ 40 PSI
Output

Physical
Vehicle clearance, height 90”
Vehicle clearance, width 127”
Utility
Pneumatic .3 CFM @ 90 PSI

DISCONNECT AND LOCKOUT ELECTRICAL POWER BEFORE SERVICING ANY
EQUIPMENT!

CAUTION

Always wear safety glasses when performing maintenance on any equipment

CAUTION

It is recommended that a licensed electrician is contracted to perform all electrical installations.

CAUTION

A compressed Air System should be set correctly to support 90 PSI necessary to operate
equipment, but should never be set to deliver more than 120 PSI air pressure to the Belanger
specified equipment.

Note: YOUR HYDRAULIC SYSTEM MUST BE CAPABLE OF ADJUSTMENT TO 76 RPM
AT 900 PSI (62.1 BAR) WHILE LOADED AGAINST VEHICLE. PLEASE VERIFY
YOUR SYSTEMS CAPABILITY TO MEET THESE SETTING WHILE RUNNING A
VEHICLE PRIOR TO INSTALLING PIECE OF EQUIPMENT!

8 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL763