Page 14 - Twin Wave Mitter™

®
TWIN WAVE MITTER

Installation

Utilities

Water
The water manifold can be manipulated to accommodate the main water feed from either side of the unit.

CAUTION

It is recommended that a licensed plumber is contracted to perform all water installations.

1) Determine the side in which you would like to supply the unit with water. If it is not the side that
already has the “Tee” on the manifold, remove the tee with both barbed hose fittings and place it
on the opposite side of the machine.
2) Once the tee has been placed on the appropriate side, connect a 3/4” water feed to the manifold
inlets.
®
Note: Fittings require a water sealant. We recommend using Teflon tape, pipe dope or an
equivalent.

Barbed Main
hose water
fittings Barbed feed
hose
fitting

“Tee”

Manifold Manifold without “Tee” Manifold with “Tee”

12 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL763