Page 52 - DuraTrans XD® Conveyor

DURATRANS XD® CONVEYOR

Maintenance

Trouble Shooting

Problem Solution

Conveyor Jams · Check for fallen objects or obstructions on all tracks
· Check chain tension. CAUTION: LOOSE CHAIN CAN
CAUSE SERIOUS DAMAGE

· As the chain wears and stretches due to normal
operation, be sure to pay close attention to the Tension
Cylinders stroke lengths. It is NOT to be fully extended. If
it IS fully extended, remove chain links accordingly
· Check electrical circuit to 4-way solenoid valve
Rollers will not come up on demand
· Make sure 4-way solenoid valve is shifting

· Make sure ramp is free from obstructions and not
jammed
· Check flow-controls on Roller-Up Cylinder
· Check air pressure

· Make sure hydraulic power unit is the correct size
Operates too slow
· Check for hydraulic leaks
· Check for obstructions in hydraulic lines

· Check pressure at hydraulic power unit.
Slows down during operation
(normal operating pressure is 1,000 PSI [68.9 BAR])
· Check motor for leaks

· This condition usually is due to an incorrect installation.
Vehicle jumps off track
Consult installation manual, or call your local distributor,
or a representative from Belanger®, Inc. Customer
Service Department
· Inspect plastic guide rail for damage and replace as
needed

CAUTION

CAUTION: LOOSE CHAIN CAN CAUSE SERIOUS DAMAGE.

48 Belanger, Inc®. * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL010