Page 15 - Wind Doors

WINDDOOR

Installation

Air Enclosure Kit

Note: In the case where your Wind Door setup does not include the optional Enclosure, go
directly to the next section.
1) Locate the “Air Enclosure Vinyl Kit” and the “Air Enclosure Mounting Kit”.
2) Locate the two 106” x 16” Side Vinyl Strips and the two 106” x 1” Leg Curtain Retainer, stored in the
Air Enclosure kit.
3) Taking one of each, secure one side of the vinyl strip to the front of the driver side Leg Beam using
the supplied self tapping screws.
4) Secure the other side of the vinyl strip to the facing wall of the building also using the self tapping
screws. These flaps will help minimize any air leaks around the Wind Door™ and building door
opening.
5) Repeat step 4 on the opposite side.

1MANUL874 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 13