Page 22 - Wind Doors

WINDDOOR

Installation

Photo Eye Dip Switch Programming

MODEL NUMBER
SWITCH PROGRAMMING
SWITCH CL3RA CL3RB
= OFF = ON LOCATION
CL5RA CL5RB
HOOKUP DIAGRAM
+ 15V
250VAC
SPDT 5A INPUT
RELAY
OUTPUT COM
N/C OUTPUT = N/O OUTPUT =
.15 SEC. .15 SEC. .15 SEC.
MAX. TIME MAX. TIME MAX. TIME SWITCH SUPPLY INV
AC
AUX
4 VA
ON/OFF ON DELAY OFF DELAY BOTH DELAYS 1-SHOT DELAYED 1-SHOT LIMIT REPEAT CYCLE AC LATCH DC LATCH DELAY = LATCH LIMIT = LATCH LOCATION 50/60 HZ = input
AC Supply: RA=110V, RB=220V
Pin 3: Sensor supply; 50ma max.
Pin 2: Sink to Common
when pin 11 is jumpered to pin 10)
NOTE: when switches 1 - 7 are programmed for (Release from Common = input
ON/OFF logic, switches 9 & 10 are disabled.

Note: Programming set at the factory.

20 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL874