Page 10 - Auto Fluid Injection System (AFIS)

AUTO FLUID INJECTION SYSTEM (AFIS)

Installation

Assembly

1) Locate an appropriate place to mount the AFIS™ on the wall. The distance from the floor should
be only as nigh as necessary.
2) Supply a 3/4” water supply to the main water feed located at the end of the copper pipe. The
opening is spaced away from the wall to correlate with a (supplied?) piece of “Unistut” aluminum.
3) If a flow control valve is needed, it is to be installed on the main water fed side of the manifold.
Note: Flow control valve not supplied by Belanger, Inc.

3/4” Main
Water Feed
4) From the main solution outlet, run piping to the inlet of the piece of equipment that the solution is
injected to.

3/4” Main
Solution Feed

8 Belanger , Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL006