Page 10 - Wave Across™ Signature® Series

WAVE ACROSS™ Signature ® Series

Introduction
®
Congratulations on your purchase of the Belanger, Inc. Wave Across . The Belanger, Inc. Wave
®
Across is designed to operate in only 84” (213.4 cm) of tunnel space. If followed by a rinse arch, an
envelope of 116” (294.6 cm) is required.
The replacement cloth is available in the standard colors: Black, Blue, Green and Red.

The plastic pieces that hold the mitter cloth (“Mitter Waves”) come in Black, Blue, Green, Red
and Yellow.
The cloth pieces or the “Mitter Waves” (plastic fins) can be purchased in complete sets or
individually.
Contact your local distributor for details.
®
The purpose of this manual is to familiarize you with the way that the Wave Across is installed.
The “Installation” section will be used in conjunction with the location diagram, and the Wave
®
Across drawings. All of these combined are your guides to installation.
The “Maintenance” section will be used to make sure you can keep your car wash component
looking and functioning like new.
Whether you have already operated a car wash or you are new to our industry, you know the
importance of the appearance of a car wash and its equipment to the customer. Keeping the
equipment clean will not only make the equipment easier to maintain, it will act as an example to
your customer to keep their equipment (their vehicle) clean as well. Replacing the cloth in your
tunnel as necessary will also help the image of your wash and keep the customer coming back.
®
Read through the entire manual to familiarize yourself with the Wave Across before installation.
When installation is completed, you will want to keep this manual as a guide to proper
maintenance.

6 Belanger, Inc. * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL851