Page 12 - Top Wheel Mix & Match

TOP WHEEL Mix and Match

Introduction

Before You Get Started

Tools needed for installation:

Forklift Clamps
Hammer drill with 5/8” (15.8 mm) bit Tin snips
Torque wrench with 1/2" drive 1-1/8” socket with 1/2” drive
Tape measure (25 foot [8 m] or greater) Safety glasses
Miscellaneous hand tools Work gloves
Level 50 foot extension cord

Equipment included: Qty
Driver side leg weldment 1

Passenger side leg weldment 1
Driver side arm assembly 1
Passenger side arm assembly 1
Crossover beam assembly 1
Neo-Tex or brush wheel Depending on selection
Neo-Tex, skins and wash clips Neo-Tex machines ONLY
Accessory box 1

Electric or Hydraulic drive assembly Depending on selection
Retract assembly option 1 if purchased

Styles Available:

Base top wheel Standard parts
Wheel option Neo-Tex, Whisper Wheel or Brush
Drive Option Hydraulic or Electric
Retract option Uses air cylinder and panel to retract

Note: Uncrate and inspect shipment for damage, and to verify that all pieces are there. If there is
any damaged equipment, file a claim with the trucking company immediately. Receiving
party is responsible for filing claim with trucking company. Notify your local distributor or
Belanger, Inc. immediately If shipment is determined damaged or incomplete.

8 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL749