Page 16 - Top Wheel Mix & Match

TOP WHEEL Mix and Match

Installation

Hub Assembly

Neo-Tex Hub Assembly
1) Locate the 2 wooden risers from the shipping pallet and place the hub on the risers with the
5-hole pattern on the driver side and secure the locking collar to the hub as shown below.

13-1/2”
5-Hole Pattern This measurement is taken from
the outside of the collar to the
13-1/2” outer edge of the 4-Hole Hub

4-Hole
Pattern
Position 1
Driver
Side

Passenger
Side
2) Slide the first row of 10” wide Neo-Tex® cleaning material into every other slot. Secure one
of the locking collars into place, snug it against the wash clips as shown below.
Note: Slide in the Neo-Tex® pieces using every other slot on the hub; spin the hub as needed
until there are 15 pieces around the hub.

Install Row 1 Install Clamp
Driver Side

12 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL749