Page 21 - Top Wheel Mix & Match

TOP WHEEL Mix and Match

Installation

Frame Assembly

Securing Drive Shaft Assembly to the Driver Side Arm (Electric Drive)
The driver side Arm requires the installation of a shaft assembly prior to securing it to the frame
assembly.

1) Locate the driver side Arm (shown below). It is identified by the Motor Drive Mount Plate pointed out in the
image below.

Motor Drive Mount Plate

2) From the accessory box, locate the 1/2-13 x 3-1/2” bolt.
3) Rotate the bearing so the opening is aligned with the lower bearing mount bolt.

Align this slot and
bolt together

4) Remove the existing 1” long bolt and the lock washer. Replace it with the 3-1/2” bolt from the accessory box.
This will prevent the bearing from spinning during the torque process.

Remove the 1”
bolt and the Insert the
lock washer 3-1/2” bolt

1MANUL749 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 17