Page 22 - Top Wheel Mix & Match

TOP WHEEL Mix and Match

Installation

Frame Assembly

Securing Drive Shaft Assembly to the Driver Side Arm (Electric Drive)
5) From the accessory box, locate the 1/2” thick spacer and the shaft. Also retrieve the 3/4-16 x 1-1/2” bolt, 3/4” flat
washer and the 3/4” lock washer.
Secure the parts into place as shown below. Apply Red Loctite® 271™ on the 3/4-16 x 1-1/2” bolt.
Electric Drive Shaft

3/4” flat washer
3/4” lock washer

1/2” thick spacer
Drive Shaft for 1HP Motor used for
Neo-Tex and Whisper Wheel

3/4-16 x 1-1/2” bolt

(Apply “Red Loctite® 271™)

Electric Drive Shaft
3/4” flat washer
3/4” lock washer

1/2” thick spacer
Drive Shaft for 2HP Motor used for
Brush Style Wheel
3/4-16 x 1-1/2” bolt

(Apply “Red Loctite® 271™)

6) Using a torque wrench, tighten the 3/4-16 x 1-1/2” bolt to 120 ft/lb.
Drive Shaft for Whisper Wheel Shown

7) Remove the 3-1/2” bolt and replace the original 1” bolt and tighten it into place.

Reinstall 1” bolt
Remove
and the lock
3-1/2” bolt washer

18 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL749