Page 27 - Top Wheel Mix & Match
P. 27
TOP WHEEL Mix and Match
Installation
Frame Assembly
Attaching the Legs
See the image below to help determine the passenger side leg from the driver side leg.
Driver Side Leg has this
Posi-Stop Mount
1) Cut the tie-wrap from the shock mounted to the driver side arm and remove the 5/8 x 3” bolt
and nut to allow removal of the Shock Assembly from the driver side Arm Assembly.
2) Once the two legs have been identified, secure the leg to the arms in the orientation shown
below.
Shock located here
Direction of Travel
You may need someone to rotate the end of the legs to get the bolts into place. Four 7/16-14 x 1”
bolts are required on each leg. Use lock washers on all bolts.
You may have to pivot the legs to access
the bolt holes
Secure the driver side legs to the arms Secure the passenger side legs to the arms
1MANUL749 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 23
