Page 32 - Top Wheel Mix & Match
P. 32
TOP WHEEL Mix and Match
Installation
Frame Assembly
Motor/Gearbox Installation: Electric Drive Brush Wheel
1) Locate the electric motor 1/4” x 1/4” steel key. Apply “Never Seize” to the drive shaft keyway
and slide the key into the slot on the driver side arm as far as it will go in as shown below.
Before After
2) Carefully secure the motor assembly to the mount in the proper orientation as shown below.
3) The electric drive gearbox will be secured to the outer holes of the mounting plate using 3/8-
16 x 1-1/4” bolts with lock washers.
Before After
4) Tighten the setscrews of the gearbox using a 5/32” Allen wrench.
Setscrews
located here
28 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL749
