Page 31 - FreeStyler® Maintenance Manual
P. 31
®
MAINTENANCE
Chapter 2 Preventative Maintenance
Monthly Inspection List
Pumping Station
Remove the belt guard; inspect the belt for proper tension and wear
Note: Refer to the pumping station section of this manual for instructions on adjusting the belt
tension.
Check the oil level and quality in the Cat™ Pump. Use only Cat™ pump oil.
Verify all nozzles are clean.
Run a vehicle and inspect the pressure gauge on the pumping station during the high-
pressure passes.
Note: The pressure should be within 50 PSI of the original setting.
Note: If this is NOT the case, the nozzles may be worn.
Determine the pump velocity per the Installation Manual’s Startup Procedure and set the
proper speed in all programs.
Water Softener
Check the unit for leaks. Repair as needed.
Add salt as needed.
Check the water hardness.
Note: Refer to the manual that came with your Water Softener for all factory specifications and
more in-depth maintenance.
Periodic Inspection List
The following is to be done on a periodic schedule or based on the number of vehicles, as
stated below.
HMI (E-1063-Human Machine Interface)
Check all terminal connections for tightness.
TO AVOID INJURY OR MACHINE DAMAGE, TURN OFF THE MAIN
POWER AND DISSIPATE ALL POTENTIALLY HAZARDOUS ENERGY
SOURCES BEFORE PERFORMING ANY MAINTENANCE TASKS!
1MANUL222 Belanger, Inc.® * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681 2-3