Page 210 - Revit Architecture Basics

ELEVATIONS

Elevations

We can distinguish eksteriør- (facade) or interior elevation, and these will be placed in it´s own
category in the Project Browser.

View Tab ► Elevation

There are functions Elevation and Framing
Elevation, which are primarily related to Revit
Structure.

In Type Selector, select the type of desired type. The
types vary between the three versions of Revit and
depend on the project template on which the project
was started based on.
Insert the Elevation symbol and note that the symbol
is oriented to the wall.

Pressing a opstalts referral symbol in the middle, can
be added elevations in several directions around the
reference. Put a check mark in the direction where
you want an elevation.

If the tip of the symbol is highlighted, a line can be
seen in the center of the elevation symbol. This is
where the elevation is seen, and the dotted line of
two arrows indicates where the boundary of the site
is.If a boundary line is desired on an instance that
does not have one, it is added to the desired cut in:

Properties ► Far Clipping

NOTE:
If Elevation has to be moved, select it with a Crossing Window over to ensure that both the
symbol and the reference line are included in the selection.

210  NTI