Page 31 - MetroSelect Single-Line Configuration Guide

6

Communications

Enable Light Pen/Wand Communication –
³ 4 1 5 5 2 4 Use this option if scanner should be used in
place of a light pen.

* Enable RS232 – The scanner will work with
³ 4 1 5 5 5 4 RS232 +/- 12V serial output.

Load Keyboard Wedge Defaults – Scan this
³ 9 9 9 9 9 4 code before selecting Normal or Stand Alone
Wedge Mode.
Enable Stand-Alone Keyboard Scanner –

³ 5 1 5 5 1 5 3 Allows scanner to be used without an external
keyboard.

Enable Keyboard Wedge Emulation – Select if
³ 5 1 5 5 1 4 3 the scanner provides keyboard emulation by
converting the scanned bar code data to the PC
keyboard scan code equivalent.

Load OCIA Defaults – Scan this code before
³ 9 9 9 9 9 3 selecting Enable OCIA output.

Enable OCIA Output – Select this option if the
³ 4 1 5 5 4 4 communications requirement is on Optically
Coupled Interface Adapter (OCIA). This is a
docked (by the host) serial interface.

Load RS485 Defaults
†
³ 9 9 9 9 9 5

Enable RS485 Communication – Select this
³ 4 1 5 5 0 4 option for RS485 SIOC/RS485 communications.
Not all scanners support this interface. The
correct interface board is required.

Enable No Communication Mode – Select this
³ 4 1 5 5 3 4 option if the scanner does not interface with the
host device.

Reserved
³ 9 1 7 5 0 0

Reserved
³ 4 1 5 5 6 4
®
† Applicable for IBM Host applications.
6–1