Page 35 - MetroSelect Single-Line Configuration Guide

Same Symbol Time Outs

The length of time before a bar code can be rescanned after it is removed from
the scan field is user-configurable in increments of 50 msecs to 6350 msecs
(6.35 sec).

If using an MS9500 or IS4125, go to page 17–3.
~ Variable Same Symbol Time Out – While in
³ 9 1 8 9 0 0 configuration mode, scan this bar code followed
by the appropriate code byte sequence (on page
16–1) to set the same symbol time out duration.
This feature is not supported for the MS9500
series or the IS4125, refer to page 17–3 for
additional information.
No Same Symbol Time Out

³ 8 1 8 9 0 0

Infinite Same Symbol Time Out – The scanner
³ 1 1 8 9 1 7 will not repetitively scan the same bar code.
This option overrides the symbol rescan time-outs.

Enable 2 Second Time Out – after 2 seconds of
³ 1 1 9 4 1 4 inactivity the laser will turn off and stay off until
the CodeGate button is pressed. This feature is
for the MS5145 only.

Disable 2 Second Time Out
³ 1 1 9 4 0 4

LED Options

Flash Green LED if Rescan Allowed – This
³ 1 1 8 3 1 3 indicates same symbol timeout has elapsed.

Do Not Flash Green LED if Rescan Allowed
³ 1 1 8 3 0 3
Reverse LED Functions – Red = Laser On
³ 1 1 8 3 1 2 Green = Good Read

* Normal LED Functions – Green = Laser On
³ 1 1 8 3 0 2 Red = Good Read

7–3