Page 181 - Chem Service 2016 Catalogue

CALIBRATION MIXTURE
EPA METHOD 8015C
Acetonitrile Ethyl methacrylate Acrylamide Isobutyl alcohol
Methyl methacrylate
Diethyl ether
Methacrylonitrile
2-Butanone
EPA 8000 100ug/mL in Methanol:Water(90:10) (12 components)
Ethyl alcohol
4-Methyl-2-pentanone
1,4-Dioxane
Propionitrile
1mL Ampule
M-CS8015C4AP1-1ML
CALIBRATION MIXTURE
EPA METHOD 8015C
N-Nitrosodi-n-butylamine 2-Picoline
Pyridine o-Toluidine
2000ug/mL in Methanol:Water (90:10) (4 components)
M-CS8015C5AP-1ML 1mL Ampule
METHOD 8020B - AROMATIC VOLATILE COMPOUNDS
Method 8020 is applicable for the determination of the concentration of aromatic volatile organics by GC with detection by a photo-ionization
detector (PID).
BTEX MIXTURES SURROGATE STANDARDS
EPA METHOD 8020B, 502/524, CLP EPA METHOD 8020B
Benzene Ethylbenzene 1-Bromo-4-chlorobenzene
Toluene o-Xylene S-10022M1-1ML 100ug/ml in Methanol
m-Xylene p-Xylene S-10022M1-5ML 100ug/ml in Methanol
200ug/mL in Methanol (6 components) 4- Bromofluorobenzene
M-BTEX1M2-1ML 1mL Ampule S-10809M5-1ML 2000ug/mL in Methanol
2000ug/mL in Methanol (6 components) S-10809M8-1ML 10000ug/mL in Methanol
M-BTEX2M5-1ML 1mL Ampule
N-10119-100MG 1,4-Difluorobenzene
INTERNAL STANDARDS S-10119M5-1ML 2000ug/mL in Methanol
S-10119M5-5ML
2000ug/mL in Methanol
EPA METHOD 8020B,
N-10989-1G a,a,a-Trifluorotoluene N-11997-1G Fluorobenzene
S-10989M1-1ML 100ug/mL in Methanol S-11997M5-1ML 2000ug/mL in Methanol
S-10989M1-1ML 100ug/mL in Methanol S-11997M5-5ML 2000ug/mL in Methanol
S-10989M5-1ML 2000ug/mL in Methanol
S-10989M5-1ML 2000ug/mL in Methanol
AROMATIC VOLATILE ORGANICS MIXTURE
EPA METHOD 8020B
Benzene 1,4-Dichlorobenzene m-Xylene Chlorobenzene
Ethylbenzene p-Xylene 1,2-Dichlorobenzene Toluene
1,3-Dichlorobenzene o-Xylene
100ug/mL in Methanol (10 components)
M-AVO1M1-1ML 1mL Ampule

PLEASE NOTE:

Most Chem Service materials are overfilled approximately 10%, at the time of filling, to compensate
for any irretrievable product remaining in the bottle. A small spatula, or micro pipette can be used to
remove a known or weighed amount of sample to be placed into a measured amount of solvent.

180