Page 189 - Chem Service 2016 Catalogue

METHOD 8100 - PAH

Method 8100 is applicable for determination of polynuclear aromatic hydrocarbons (PAHs). This method provides gas chromatographic
conditions for the detection of PPB levels of certain polynuclear aromatic hydrocarbons. Prior to the use of this method, appropriate sample
EPA 8000 POLYNUCLEAR AROMATIC HYRDOCARBONS (PAH)
extraction techniques must be used. Both the neat and diluted organic liquids (Method 3580, waste dilution) may be analyzed by direct
injection. (A 3 to 5 ul aliquot of the extract is injected into a gas chromatograph (GC) using a solvent flush technique and compounds in the
GC effluent are detected by a flame ionization detector (FID). If interferences prevent proper detection of the analytes of interest, this method
may also be performed on extracts that have undergone cleanup using silica gel column cleanup (Method 3630).

EPA METHOD 8100, 550.1, 610, 8270B, 8310, CLP
Acenaphthene Acenaphthylene Anthracene 1,2-Benzanthracene
Benzo(b)fluoranthene Benzo(k)fluoranthene 1,12-Benzoperylene Benzo(a)pyrene
Chrysene 1,2:5,6-Dibenzanthracene Fluoranthene Fluorene
Indeno(1,2,3-C,D)pyrene Naphthalene Phenanthrene Pyrene

100ug/mL in Methanol (16) components)
M-PPH10M1-1ML 1mL Ampule
M-PPH10M1-5ML 5mL Ampule
200ug/mL in Acetonitrile (16) components)
M-PNA550A2-1ML 1mL Ampule
2000 ug/ml in CH2Cl2:Benzene (50:50) (16) components)
M-PPHC6AD5-1ML 1mL Ampule
M-PPHC6AD5-5ML 5mL Ampule
PAH CONTROL SAMPLE MIXTURE
EPA METHOD 8100, 550.1, 610, 8310
100ug/mL Acenaphthene 100ug/mL Acenaphthylene
100ug/mL Anthracene 10ug/mL 1,2-Benzanthracene
10ug/mL 1,12-Benzoperylene 10ug/mL Benzo(a)pyrene
10ug/mL Benzo(b)fluoranthene 5ug/mL Benzo(k)fluoranthene
10ug/mL Chrysene 10ug/mL 1,2:5,6-Dibenzanthracene
10ug/mL Fluoranthene 100ug/mL Fluorene
10ug/mL Indeno(1,2,3-C,D)pyrene 100ug/mL Naphthalene
100ug/mL Phenanthrene 10ug/mL Pyrene
Varied concentration in Acetonitrile (16) components)
M-CSM8310A99-1ML 1mL Ampule
INTERNAL STANDARDS SURROGATE STANDARDS
EPA METHOD 8100 EPA METHOD 8100
N-10736-100MG 3-Methyl cholanthrene N-10359-1G 2-Fluorobiphenyl
S-10736U1-1ML 100ug/ml in Toluene S-10359X5-1ML 2000ug/ml in Methylene chloride
S-10736U1-5ML 100ug/ml in Toluene S-10359X5-5ML 2000ug/ml in Methylene chloride
S-10359M1-1ML 100ug/ml in Methanol
S-10359M1-5ML 100ug/ml in Methanol
N-10057-1G 1-Fluoronaphthalene
S-10057M1-1ML 100ug/ml in Methanol
S-10057M1-5ML 100ug/ml in Methanol

ADDITIONAL METHOD ANALYTES
EPA METHOD 8100
N-11622-10MG Dibenz(a,h)acridine N-10170-10MG 1,2:6,7-Dibenzpyrene
S-11622M1-1ML 100ug/ml in Methanol
S-11622M1-5ML 100ug/ml in Methanol 1,2:7,8-Dibenzpyrene
S-10134U1-1ML 100ug/ml in Toluene
N-11623-10MG Dibenz(a,j)acridine S-10134U1-5ML 100ug/ml in Toluene
S-11623U1-1ML 100ug/ml in Toluene
S-11623U1-5ML 100ug/ml in Toluene N-11167-10MG Benzo(j)fluoranthene
S-11167M1-1ML 100ug/ml in Methanol
N-11623-10MG 1,2:4,5-Dibenzpyrene S-11167M1-5ML 100ug/ml in Methanol
S-10168U1-1ML 100ug/ml in Toluene
S-10168U1-5ML 100ug/ml in Toluene N-10736-10MG 3-Methylcholanthrene
S-10736U1-1ML 100ug/ml in Toluene
S-10736U1-5ML 100ug/ml in Toluene

188