Page 117 - Wurth Total Catalogue

NYLON FIBRE CLEANING DISC Design and Characteristics.

Coarse-structured, elastic and abrasive cleaning fleece made from Flexible and open fleece structure.
a special combination of synthetic fibres and evenly embedded abrasive • Ideal adaptation to the geometry of the workpiece for optimal contact
grit (silicon carbide). with the surface.
• Hardly any clogging with surface abrasion.
Areas of Application: • Even and reproducible grinding results.
• Cleaning of weld seams, metal surfaces, wood and plastics. • Reduced heat build-up → cool grinding.
• Removal of blooming discolouration, cinder, rust, corrosion, dirt and Permanent release of fresh abrasive grit.
oxide layers, coatings, paint, old paintwork, synthetic resins, adhesives, • Uniform and constant grinding results as well as a clean surface free
gasket residue, cement and concrete residue. from residue.
• Structuring, strip deadening, preparing and roughing of surfaces. Easy control of grinding performance.
• Light deburring jobs. • Minimised risk of damaging the surface or removing too much material.
• Cleaning of vehicle undersides as well as other diversified work Free from corrosion-promoting materials.
in car body shops. • No contamination of the material surface.

Materials to be Processed:
All-round use on nearly all materials. Especially well suited for stainless With exchangeable Tensioning Spindle.
steel, steel, non-ferrous metals, wood and plastic materials. • For use in power drills, straight grinders and flexible shafts.
• Use only with suitable mandrels and support flanges.

Attention: Flange diameter > half of disk diameter!

Mandrels:

Ø x Width Maximum Recommended Art. No. Pack Description Total Art. No. Pack
mm rpm. rpm. Qty. Length Qty.
100 x 13 6,000 3,500 – 4,500 0585 110 0 10 mm
150 x 13 4,000 2,500 – 3,000 0585 115 0 5 6mm Shaft, for disk 0585 110 0 52 0585 110 01
and 0585 330 100 1
8mm shaft, for disk 0585 115 0 70 0585 115 01

With cloth plate.
• For direct use on angle grinders.
No additional support plate required.
• 150mm dia. for use on angle grinders 100mm.

Ø x Width Hole Max Art. No. Pack
mm in mm rpm. Qty.
100 11,000 0585 310 0
125 22.2 10,000 0585 312 5 10

AUS. pub. 05/15 © Partner Product:
Personal Protective Equipment

03 1631