Page 154 - Wurth Total Catalogue

HHS RANGE INFORMATION

HHS Drylube High-Performance Dry Lubricant Resistant to Centrifugal Force PTFE wax Yellowish Synthetic wax 3 not applicable for gre- ases 0.76 –30 100 180 100 130 –20 350 Good Very Good Very Good Very Good 0 30 Aerosol, 400 ml 1/6

HHS Grease White High-Performance Maintenance Grease Containing PTFE PTFE Bright White 25 Mineral oil + lithium soap 2 not applicable for gre- ases 0.78 –15 130 200 130 200 –20 163 Very Good Very Good Very Good Very Good 1 30 Aerosol, 400 ml 1/6/12/24

HHS Lube Dirt-Repelling Sprayed Grease with Long-Term Action and OMC2 OMC 2 Opal Green Synthetic grease + lithium soap 2 not applicable for greases 0.77 –25 150 170 150 240 –20 153 Good Very Good Very Good Very Good 0-1 30 Shake can well. Thoroughly pre-clean the parts to be treated with HHS CLEAN, Art. No. 0893 106 10, then spray onto the cleaned surface from a distance of Aerosol, 500 ml 1/6

HHS Fluid Fluid Grease Resistant to Centrifugal Force none Yellowish Synthetic oil and grease 1 2000 0.77 –25 170 200 170 220 –20 86 Good Very Good Very Good Very Good 0-1 30 Aerosol, 500 ml 1/6

HHS 2000 High-Pressure Resistant Highly Adhesive Synthetic Lubricating Oil none Yellowish Partially-synthetic not applicable for oil for oils 1500 0.75 –35 180 200 180 230 –20 78 Good Very Good Very Good Very Good 0-1 30 Aerosol, 500 ml 1/6/12/24

HHS 5000 High-Performance Fully-Synthetic Creep Oil with PTFE PTFE Transparent All-synthetic oil not applicable for oil for oils 200 0.77 –20 200 250 200 250 –30 158 Very good Very good Very good Very good 0-1 30 approximately 20 cm. Aerosol, 500 ml 1/6/12

Table of Technical Values Consistency, Density, Viscosity Lower operating temperature range, °C Upper operating temperature range, °C Operating temperature range, temporary, °C Flash point,°C (without solvent) Flash point,°C (with solvent) Loadability, Wear Protection, SKF-Emcor method (DIN 51802),

AUS. pub. 02/17 © Product Type Solid Lubricant Colour Base oil NLGI class Viscosity in mm 2 /sec Density at 20°C, g/ml Temperature Drop point,°C Life SRV (DIN 51834) Wear factor Resistance Oxidation resistance Material resistance Elastomers Plastics Painted surfaces Corrosion protection Degree of corrosion Shelf Life, Months Application Method Container Size Packing Unit

04 1002