Page 151 - Wurth Total Catalogue

SILICONE FLUID

High-quality, physiologically safe anti-
friction and release agent.

Can be used in areas in which food is
processed or stored. NSF H1 1
In this context, the product may come into contact
with foodstuffs for technical reasons.

Contains highly concentrated, high-
quality silicone oils.
• Optimum anti frictional and lubricating
properties.
• Prevents sticking.
• Eliminates unpleasant squealing noises.
• Prevents wear.

Extremely good temperature resistance
from -50°C to 250°C.
• Wide field of application, also in the field of
high temperatures and as a mould release
agent.
Contents in ml Art No. Pack Qty.
400 0893 221 000 1 Colourless, non-discolouring.
• Can be used on bright backgrounds.
Technical Data • No discolouration in the case of occasional
Chemical Basis Physiologically Safe contact with the product.
Synthetic Oil
Colour Colourless Safety product.
Density at 20 C 0.97g/cm 2 • Especially user-friendly and
o
Applications: (active substance) safe handling.
o
o
As an antifriction agent and for the Temperature Range -50 C to 250 C • Improved workplace safety
2
o
lubrication of all moving parts of machines, Basic Oil Viscosity at 25 C 350 mm /s and health protection.
especially in the fields of plastics, and • Reduced marking with danger symbols.
automotive engineering, as well as in the
food, pharmaceutical, printing and paper NSF H1 registered (No.: Good material compatibility.
industries. Also used as a mould release agent 135927), corresponds to the
in the plastics processing industry and for the requirements of USDA 1998 Moisture repellent, e.g. protects rubber
protection and care of surfaces. H1. parts against frost.

Application: HACCP FZS Certified: 1 NSF = Internationally recognised organisation
Pre-clean the surface that is to be treated. PE-715-WA-01. for the supervision and registration of products
Spray on evenly from a distance of approx. used in the food sector.
20 cm.

If used in areas in which food is processed
or stored, only the technically necessary
minimum quantity may be used. If the product
is to be used as a corrosion protection film, it
must be removed completely before the
corresponding device is put into service again.
AUS. pub. 12/14 © Lubricants system

✓
□ Oil □ Fat □ Paste □ Dry lubricant □ Corrosion protection

04 0532