Page 185 - Wurth Total Catalogue

cut + cool cooling lubricant ultra

Universal, cooling lubricant for all
turning, grinding and drilling machines,
as well as machining centres.

• Outstanding rinsing effect.
• Excellent cooling effect.
• Provides very good discharge of chips.
• Cleans surfaces of machines, tools and
workpieces.
• Good lubricating performance.
• High cutting performance.
• Reduction of heat due to less friction.
• Increase in machining speed possible.
• High corrosion protection.
• Protection of workpieces, tools and
system parts already effective at low
concentrations.
• High protection against bacteria.
• Emulsion does not become contaminated as
quickly.
• Lower disposal costs.
• High economy.
• Low foaming characteristics.

Applications:
Description/Container Contents Art. No. Pack Qty. Cooling lubricant contains mineral oil and is
Container 5L 0893 050 030 1 mixable with water for all turning, grinding and
Tap for 5L container - 0891 302 01 1 drilling machines, as well as machining centres.
For general machining operation and also suited
Use: for grinding. High-quality raw materials and
Mixing % Addition % additives allows for use with a broad range of
Drilling, Turning, Sawing, Parting 4 - 5 1 - 4 materials.
Milling, Thread Tapping, Reaming 4 - 8 2 - 5
Grinding 3 - 4 1 - 3 Note:
Free of chlorine, sulphur, phosphor, silicone, acid
Use concentrations in %; refractometer factor 1.2 and resin. 2-component machine paint is not
attacked.
Always add concentrate to water and not vice
versa!

AUS. pub. 01/14 ©

04 2008