Page 186 - Wurth Total Catalogue

cut + cool cooling lubricant ultra hd

High performance cooling lubricant.

• High cooling and lubricating performance.
• Long tool life, especially for reaming and
thread tapping.
• Excellent surface quality and cleanliness of
workpieces.
• Very good results with stainless steel and
aluminium.
• Top surface quality.
• Especially high cutting performance.
• No spotting on metal pieces.
• Problem Solver for Aluminium.
• Extremely low mixing and refilling
concentration.
• Very economical.
• Reduced operating costs.
• High corrosion protection.
• High protection against bacteria.
• Very gentle on skin.

Applications:
New, cooling lubricant containing mineral oil
and mixable with water is especially suited for
machining stainless steel and aluminium. For
use on all turning, grinding, drilling and milling
Description/Container Contents Art. No. Pack Qty. machines, as well as machining centres. Suitable
Container 5L 0893 050 035 1 for light to heavy machining.
Tap for 5L Container 0891 302 01 1
Note:
Free of boron, chlorine, sulphur, phosphorus,
Use: silicone, acid and resin.
2-component machine paint is not attacked.
Mixing % Addition % Can be used on oxygen.
Drilling, turning, sawing, parting 4 - 6 1 - 2 Always add concentrate to water and not vice
Milling, thread tapping, reaming 4 - 8 1 - 2 versa!
Grinding 3 - 4 1 - 2
Use concentrations in %; refractometer factor 1.2

These instructions are only recommendations, which are based on our experience.
We advise preliminary testing before use.
AUS. pub. 01/14 ©

04 2013