Page 292 - Wurth Total Catalogue

DOS BEARING RETAINER - HIGH STRENGTH
For high strength assembly of bushes, sleeves, geared
wheels, bolts, shaft and hub connections and bearings
exposed to high loads.

Dependable curing at low temperatures around 0°C.
A dependable aid in winter.

Maximum gap filling of 0.15 mm.
Even large deviations can be corrected economically.

Prevents frictional corrosion.
Prevents seizing of bearings, providing easy disassembly.

Contents Art. No. Pack Qty. High Strength.
50g 0893 603 050 1 Keeps ball bearings safely in position.

NSF registered under ANSI Standard 61 - Drinking Water Fits tight and bonds firmly.
System Components. Resistant to chemicals and gases: see • No tension peaks, but uniform load-distribution.
resistance list. • No need of feather keys, wedges, pins or other mechanical items.
• Avoids micro-movement and frictional corrosion.
Physical Properties (in liquid state)
Chemical Description Dimethylacryte Note: The surface should be free of oil, grease and other contaminents
Colour Green before use.
Viscosity (spindle 4/20 rpm) 100 - 150 mPas
25°C Brookfield RVT (spindle rpm: 1/20) Physical Properties (in cured state)
Density 1.07g/cm� Hand-tight After 5 - 10 minutes
Maximum Thread Diameter M 12 Usable After 30 - 40 minutes
Maximum Gap Filling Capacity 0.15 mm Find Strength After 3 - 6 hours
Flash Point > 90°C Pressure Shearing Strength (DIN 54452) 18 - 26 N/mm�
Shelf Life 1 Year at Room Temperature Operating Temperature Range -55°C to 150°C

DOS BEARING RETAINER - HEAT RESISTANT For fastening bushings and bearings exposed to high

temperatures.

Can be used in temperatures from –55°C to 200°C (short-
term resistance up to 230°C).
Strength at 100°C still 85% of the maximum strength.

Minimises vehicle down time.
Quick hardening: Touch-dry after 40 minutes, functional after 1 to 3 hours.

Prevents frictional corrosion.
The bearings will not seize up.

Technical Information Resistant to a large number of bases, gases, solvents, oils
Chemical Description Dimethylacryte acid ester and fuels.
Colour Green
Viscosity (spindle 4/20 rpm) 100 - 160 mPas Silicon-free.
25°C Brookfield RVT (spindle rpm: 4/20)
Density 1.1 g/cm� Note: The surface should be free of oil, grease and other contaminents
M 36
Maximum Thread Diameter
before use.
AUS. pub. 08/17 © Maximum Gap Filling Capacity 0.2 mm Contents Art. No. Pack Qty.
90°C
Flash Point
0893 620 050
50g
1
Shelf Life
1 Year at Room Temperature
05 1519