Page 291 - Wurth Total Catalogue
P. 291

DOS MOTOR SEALANT



                                                                Replacement for solid engine seals on pressure chambers as
                                                                well as screw connections.

                                                                Can be used with or without gasket.

                                                                High temperature resistance.
                                                                Seals reliably up to 280°C.

                                                                Pressure resistant up to 700 bar (depending on shape and
                                                                flange width).
                                                                Also suitable for high pressure lines and pressure chambers.

                                                                Excellent adhesion.
                                                                Seals glass, ceramic and metal surfaces  permanently and securely.


                                                                Resistance List:
                                                                The engine sealing compound  MOTOR SEALANT has good resistance to
        Technical Values                                        the following: Engine oil, transmission oil, hydraulic oil (mineral, synthetic),
        Components               1                              diesel fuel,  heating oil, coolant, brake fluid, waste water, alkaline
        Base                     Resin                          lye, formic acid,  alcohols (methyl, ethyl, etc.), ethyl  acetate, acetone,
        Specific Weight at 20°C  1.08                           chlorinated solvents, phosphoric acid (10%).
        Film Formation, Pot Life  5–7 minutes
        Thermal Behaviour        –50 °C to 280 °C               Gases: Acetylene, carbon dioxide,  propane, sulfur dioxide, hydrogen.
        Pressure Tested up to    Approx. 690 bar                Due to space limitations this list is incomplete and restricted to the most
        Viscosity in mPas        Approx. 5,000–13,200           important media. A complete list is available upon request.
        pH Value                 Approx. 7
        Shelf Life               1 Year                         Note:
        Total Deformation        25%                            The above information is intended as a recommendation only, based on
        Max. Gap                 2 mm                           our experience. As a matter of principle, we recommend that you carry out
                                                                your own tests.
       Application:
       Step 1:  Clean and dry the surfaces to be sealed.
       Step 2:   Apply a thin layer of the material on one side and leave for   Contents  Art. No.   Pack Qty.
                  5 to 7 minutes to air.                         100g            0893 260 100        1
       Step 3:   Then join two surfaces. Thermal hardening possible from 60 C.
                                                      o
              It is relatively easy to separate the joined parts if necessary.
       Caution:
       Not suitable as cylinder head gasket alternative.















        Resistance Table For Dos-System:
     AUS. pub. 08/17 ©  • Kerosene   • Alcohols   • Formic Acids  • Ethelacetate   • Acetone   • Petrol   • Alkaline Solutions  • Steam
        • Phosphoric acid (10%)   • Diesel
                                                                                                         • Coolants
                                                                                         • Heating oil
                                        • Jet Fuel
                                                    • Aviation Spirit  • Frost protection  • Gear oil
                                                                 • Xilene
                                                                               • Brake Fluid
                                                    • Oils
                           • Hydraulic oil
                                        • Engine oil
        • Solvents (chlorinated)
                                                         05 1514
   286   287   288   289   290   291   292   293   294   295   296