Page 300 - Wurth Total Catalogue

HIGH TACK ADHESIVE MS5

Fast-hardening, high-modulus, UV and weather resistant,
single component, MS polymer adhesive with high initial
tack. White in colour.

Suitable for:
Elastic bonding and sealing for vehicle construction eg. bus, train, caravan,
metal. Adheres to a wide range of substrate materials such as metal,
painted surface, timber, stone, concrete and plastic.

Advantages:
Non-hazardous.
Isocyanates and solvent-free, user-friendly.

High initial tack.
Fast fixing, time saving, not need for extra supporting accessories in most
cases.

Contents Art. No. Pack Qty. UV & Weather Resistance.
290ml 0892 329 101 1/12 Suitable for outdoor application. Long service life.

Primerless on a wide range of surfaces.
Can be applied without primer to most surfaces (except PTFE, PE, PP).

Suitable for painting over.
Can be painted over with all conventional paint systems (even wet on wet).

Technical Data CAUTION:
Base material MS Polymer Due to the short skinning time, planning may be required for large
Colour White applications.
Density at 20°C 1.4 g/cm 3
Change in volume (DIN 52451) < 3% Example: Higher humidity equals even faster skinning and curing rate,
Shore A hardness (DIN 53505) Ca. 55 please observe and monitor the percentage of humidity in the air during
Elongation at break (DIN 53504) CA. 210% the application process.
E-Modulus (5 - 10%) (DIN 535504) Ca. 2.8 MPa
Tear propagation (DIN 53515) Ca. 14 N/mm
Skin forming time (20 C/50% R.H.) Ca. 12 min.
o
Curing speed after 24hrs (20 C/50% R.H.) Ca. 4mm
o
Temperature resistance -40 C to 120 C
o
o
Application temperature 5 C to 35 C
o
o
Shelf Life 18 months
Test conducted at 20 C and 50% R.H.
o

AUS. pub. 08/17 ©

05 2505