Page 303 - Wurth Total Catalogue

CAVITY WAX

For repairs and long-lasting protection.

Excellent creeping behaviour.
Even hard-to-reach seams are effectively
protected.

Water-displacing effect.
Moisture is subverted and displaced.

High heat-resistance and good
flexibility in the cold.

Colour Contents Art. No. Pack Qty.
Transparent 1000ml 0892 082
Transparent 500ml 0892 082 500 1/12

Accessory Length Art. No. Pack Qty.
Spray Probe with 360 Fan Suits 500ml Aerosol 600mm 0891 081 1
o

Application: Note:
1000ml: Shake can well before use. Thinly apply The material temperature should be 18 C to
o
cavity wax using the pressurised gun and the 30 C. Recommended dry layer thickness: 2 - 3
o
corresponding tube. spray passes.
500ml Aerosol: Shake can well before use. We recommend two applications for
Apply spray directly or with the tube/spray classic cars.
probe, depending on the area of use. Ventilate cavities well after processing.

Areas of Application:
For long-lasting protection of areas in vehicle
body cavities prone to corrosion. Used for
subsequent treatment of existing sealers and for
restoring corrosion protection after an accident
repair.

Technical Data:
State Fluid
Colour Transparent
Smell Characteristic
Relative density at 20 C 0.9 g/ml
o
Water-soluble No
Viscosity at 23 C (Rheomat) Approx. 30 mPas
o
Solid particle contents Approx. 55 %
Pass-through time DIN 4 mm / 23 C Approx. 18 s
o
Flash Point (DIN EN 22719) 40 C o o
o
Shelf Life
From 10 C to 30 C; 36 months (aerosol) / 24 months (liquid)
AUS. pub. 08/16 ©

05 3031