Page 307 - Wurth Total Catalogue

STONE CHIP & CORROSION PROTECTION AQUA

Climate-optimised, water-based coating mass which can be
painted over (formerly SKS).

• Dries through down to -10 C.
o
• Depending on the application method, fine and coarse textures can be
sprayed.
• Very good anti-drone effect.
• Very high abrasion resistance.
• Suitable for oven drying up to 60 C.
o
• Very easy sanding after through-drying.
• VOC reduced.
• Water based and can be painted over.
• Solvent-free.
• Bitumen-free.

Areas of applications:
For repair and restoration of the original texture and for protection
against stone chips and corrosion in all visible areas e.g. front and rear
valances, side skirts. etc.
Colour Contents Art. No. Pack Qty. Application:
Black 1000ml 0890 030 1/12 Shake can well before use. The application surface must be dry and free
of rust; dirt and grease. Old coating mass should be removed. Can be
painted over with all paint systems after approx. 12 hours (depending on
coating thickness), especially water-based paints. Can be processed using
a spray pistol/UBS gun. Optimum spraying distance is 30 cm.
Working pressure : 3 - 6 bar.

Notes:
Dries through down to -10 C. When painting over, environmental
o
influences are to be observed. Do not spray on joints, engines,
transmissions and brake systems. Depending on the desired coating
thickness, thinning with water (max. 2%) is possible.

AUS. pub. 08/15 © Partner Product:
UBS Spray Gun
Air Regulator

05 3122