Page 308 - Wurth Total Catalogue
P. 308

STONEGUARD - UNDERBODY SEAL                           Synthetic rubber and plastic-based coating compound for

                                                                 protecting vehicle underbodies.

                                                                 Fast drying.
                                                                 •  Reduced drying time (vehicle can be driven away after approximately
                                                                   3 hours in the case of air drying)
                                                                 •  Suitable for oven-drying up to 60 C.
                                                                                          o
                                                                 Suitable for painting over.
                                                                 •  1L container can be painted over after 6-8 hours, 500ml (spray can)
                                                                   can be painted over after 3 hours with all standard painting systems.
                                                                   (Follow manufacturer's instructions.)
                                                                 •  Under coating or priming is necessary before applying 2 component
                                                                   paints.

                                                                 Excellent adhesion performance.
                                                                 •  High abrasive resistance.

                                                                 Permanently elastic.
                                                                 •  Active stone chip protection.

                                                                 Anti-drone effect.
                                                                 •  Prevents noises and vibrations.


                                                                 Temperature-resistant.

                                                                 VOC*-compliant.
         Description            Colour Content  Art. No.  Pack   •  Complies with the  OC ma imum content specified in the  OC
                                       in ml           Qty.        Directive (1999/13/EC).
         Stoneguard Aerosol Spray  Black     500  0892 071         * volatile organic compounds.
                                                       1/12
         Stoneguard (for application gun) Black  1,000  0893 075  Working pressure: Max 3 bar.
                                                                 Optimum spraying distance is 30 cm. The best spraying results are
                                                                                                  o
        Areas of application:                                    achieved at a processing temperature of 15 - 25  C.
        For touching up and for protecting the underbody, wheel wells, sills,
          spoiler, front and rear aprons, engine compartment etc.  Chemical Basis             Synthetic Resin Dispersion
        Note: 500 ml container not suitable for large-area applications.  Density             0.899 g/cm 3
                                                                 Max. temperature resistance  -20  C to 70  C
                                                                                                       o
                                                                                                o
        Application:                                             Shelf Life                   12 Months
        Shake can well before using. The application surface must be clean, dry
        and free of rust and grease. Prime bare metal parts. From a distance of
        approximately 20–30 cm, spray on with 2-3 back-and-forth motions.
        Allow the product to dry between layers in case of thicker layers. Before
        the top-coat lacquer application, it is recommended to spray on a thin coat
        to provide for better adhesion.

        Note:
        Check the application unit’s function before use. After use, turn the can
        upside down and spray until the valve is empty. Do not spray onto joints,
        engines,  transmissions and brake systems.

                                                                 Partner Products:
      AUS. pub. 09/15 ©                                          Application gun for Stoneguard
                                                                 Stoneguard spray gun
                                                                 Air regulator

                                                          05 3151
   303   304   305   306   307   308   309   310   311   312   313