Page 311 - Wurth Total Catalogue

purlogic clean

For the removal of fresh PU foam.

• Highly effective.
• Dissolves all fresh foam contaminations
quickly and easily.
• Optimised for use with PU foam guns.
• The PURlogic Clean is particularly well suited
for cleaning of Wurth PURlogic foam guns.
• The can is supplied with an additional
spray head for exterior cleaning of foam
guns and other surfaces as well as the
threaded top to directly clean the insides of
the application guns.
• Also suitable for use on some competitors
guns.
• Wide range of applications.
• Due to the good compatibility of the
cleaning compound, PU foam residue can
be removed from various different surfaces,
such as hard PVC, bright aluminium, glass
and stone or ceramic materials.

Contents Art. No. Pack Qty.
Note:
Cleans and removes fresh excess PU foam from wood, metals and many types of garments. 500ml 0892 160 1/12
Not suitable for fully cured PU foam residue. May etch surfaces such as paintwork and plastics.
Textiles may become lighter in colour or etched.

Caution:
Always perform a preliminary test with regard to the compatibility with the surface. Do not use on
film-coated plastics, types of anodized aluminium and protective paint, as well as enamels, varnishes
and similar surface protection. Stone and ceramic materials should have a sealed surface and not be
porous or absorbent. Read the safety data sheet and instructions for use prior to application!

AUS. pub. 04/12 © This information is only intended as a recommendation based on our own experience. The user should Partner Products:

PURlogic Top Foam
always perform his own preliminary testing.
PURlogic Xpress Application Gun
05 3321