Page 352 - Wurth Total Catalogue

fAsT-AcTIoN boNDING GLUe

Fast drying universal glue for gluing
all wood types. Complies with loading
group D2 according to DIN/EN 204.

Short drying time

High initial strength
Enables short pressing times.

Transparent when dry

Loading group D2
Indoor applications with occasional brief
exposure to water.

Container Contents Art. No. Pack Qty.
Bottle 500 g 0892 100 111 1/12

Instructions: • Surface adhesion of laminated sheets
The carrier material must be dust and grease- • Manual edge gluing
free and free of any kind of dirt that could inhibit • Adhesive bonding of joints, tenons and
the adhesive bond. Optimum wood moisture is anchors made of soft, hard and exotic wood
between 8 and 12 percent.
Apply glue evenly with a brush, spatula or glue Notes:
roller. Application devices should be made of stainless
steel or plastic. Open time is dependent on
Applications: material, moisture, temperature and application
• Adhesive bonding of inside doors quantity.
• Indoor steps and railings

Technical Data
Colour White
Chemical asis Polyvinyl Acetate Dispersion
pH-Value 5
Dynamic Viscosity 10500 mPas
Viscosity Condition roo eld
Density 1.09 g/cm³
Min. proportion of solids 3
Film Formation emperature in. hite oint °C
Temperature Resistance Of The Hardened Material Max. 0 °C
Shelf Life From Production 12 month
Room, Material And Glue Temperature Min./Max. 1 to 0 °C
Wood Moisture Min./Max. - 1
Processing Time Min./Max. 5 - 10 min
rocessing ime Condition 0°C and 1 0 g m
AUS. pub. 08/14 ©
0. mm
Pressing Pressure Max.

05 4272