Page 372 - Wurth Total Catalogue

road marker

Colour marking for construction
surveying and planning.

• Broad adhesive range.
• Good adhesion on absorbent and
non-absorbent surfaces, as well as slightly
moist substrates.
• Fast drying.
• Ready for traffic after a short time.
• Simple handling.
• Can is used upside down, thus enabling
well-aimed and clear marking.
• Weather resistant.
• Durable markings even under humid and
cold weather conditions.
• High-quality pigments.
• Colours are non-fading and of high
luminosity and opacity.

Application:
• Identification of road damage and construction
areas. Can be used on asphalt, grass, soil,
stone, concrete, wood, etc.
• The colour is sprayed onto the ground holding
the can upside down.
• The line width is variable by changing the
distance to the ground.
• Drying time is about 90 minutes, dust dry after
10 –15 minutes.
• Hold the can upright and spray to clean the
spray head.
• Shelf life: 3 years

Colour Contents Art. No. Pack Qty.
White 0893 199 20
Yellow 0893 199 21
Red 0893 199 22
Blue 600ml 0893 199 23 1/12
Green 0893 199 24
Neon Pink 0893 199 25
Neon Yellow 0893 199 26

These notes are intended to provide our advice to the best of our knowledge, based on our tests and
experience. However, we cannot accept any responsibility for pro cessing results of using this material
in individual cases because of the wide variety of applications as well as storage and processing
conditions beyond our control. This also applies when making use of our technical and commercial
AUS. pub. 08/10 © customer service which is provided free of charge and without obligation. We always recommend that
you carry out individual tests. We guarantee the consistent quality of our products. Subject to technical
changes and developments.

05 5121