Page 59 - Wurth Total Catalogue

MACHINE TAP HSS-E

ZEBRA Blue Ring for blind holes.

• 40° right-hand grooved, short cut.
• 2-3 speed, Form C to approx 3 x d1.
• Tap relief: Ground flanks.
Thread Pitch Shaft Length Thread Sq. Sect. Requires Art. No. Pack
Dia. d P Dia. d l Length A/F Drill Bit Qty.
1 2 1 • DIN 371 with reinforced shaft.
mm m mm mm 1 mm mm dia. (mm) Centering: Full point on cutting part, shaft with
2
3 0.5 3.5 56 7 2.7 2.5 0653 03 chamfer centering.
4 0.7 4.5 63 8 3.4 3.3 0653 04
5 0.8 6.0 70 10 4.9 4.2 0653 05 1 • DIN 376, as from M 12 form C with overrun
6 1.0 6.0 80 12 4.9 5.0 0653 06 shaft.
8 1.25 8.0 90 15 6.2 6.8 0653 08 Centering: Inner centering on both sides.
10 1.5 10.0 100 18 8.0 8.5 0653 010

Thread Pitch Shaft Length Thread Sq. Sect. Requires Art. No. Pack
Dia. d 1 P Dia. d l 1 Length A/F Drill Bit Qty.
2
mm mm mm mm 1 mm mm dia. (mm)
2
12 1.75 9.0 110 18 7.0 10.2 0653 012 1

Material Groups Material Description Examples Cut Speed Lubrication
V = m/min
Unalloyed steels to C10, C35, CK10, CK35, 9S20,
800 N/mm2 9SMn28, 95MnPb36, St 33-1, St 60-2 10 - 15
Unallyed steels C45, C60, CK45, CK60, 16MnCr5,
to 1000 N/mm2, 45S20, 60S20, 41Cr4, 36Mn5, 4 - 10
tempering steels 42CrMo4, C60W3/C135W2
Alloyed tooling steels, 14 NiCr18, 54NiCrMoS6,
rust- and acid-proof steels X10Cr13, X100CrMoV51 3-6
Cast steel, GS-38, GS-45, GS-70, GTW35, Wurth Cutting
annealed cast iron, GTW60, GTS35,GTS70, GGG368, 6 - 12 Oil
spheroidal iron GGG45, GGG70
Electrolytic Copper KE-Cu, E-Cu 8 - 11
Long-chipping brass CuZn37 (MS63), CuZn10, CuZn30 14 - 18
Soft bronze, red G-CuSn10Zn, CuSn8, (SnBz8), (Rg10), 5 - 12
bronze, tin bronze G-CuSn5ZnPb (Rg5)
Aluminium alloy G-ASi12, GD-AISi12, AlSi12CuNi 14 - 16
> 10% Si

AUS. pub. 08/11 ©

02 2073