Page 720 - Wurth Total Catalogue

radiator cleaner & conditioner

Suitable for all engines when
carrying out radiator and cooling
system repairs.

Alkaline, pH 9 – 11.
• Compatible with all substances used in
radiator construction.
• Not aggressive to plastics, rubber and
metals.
Removes corrosion and sludge deposits in
cooling circuit.
• Enhanced operating reliability due to a Air-Con
clean cooling system.
Neutralises lime residues.
• New coolant is protected against
contamination.
Anti-freeze compatible, highly effective Exhaust
surfactant mixture.
Contents Art. No. Pack Qty. Loosens and binds oily and greasy residues.
250ml 5861 510 250 1/12
1,000 ml 5861 510 001 Areas of Use:
• If the cooling system becomes
contaminated after an engine repair, Cooling
e.g. oil residues in cooling system due to
cylinder head damage.
• In event of deposits forming in cooling
circuit.
• Can be used preventively whenever the Steering
coolant is changed.

Application:
Add contents of can to coolant. Open heater
valves. Run engine for about 30 minutes.
Deposits which have been dislodged by
the radiator cleaner must be flushed away Trans
without fail.

Flushing can be carried out without removing
the thermostat. Replace coolant after use,
bleed and check for leaks. It is recommended Intake
to replace parts that have been affected by
intruding oil, such as the expansion tank and
water hoses.

Dosage:
250ml is sufficient for 10 litres of coolant, Fuel
1,000ml is sufficient for 40 litres of coolant.

AUS. pub. 09/14 © Oil

08 0565