Page 1144 - Foton Workshop Manual - Aumark (BJ1099)
P. 1144
34-114 AXLE AND PROPELLER SHAFT - MAIN REDUCER GEAR OIL
MAIN REDUCER GEAR OIL
REPLACEMENT
1. Turn off the ignition switch
2. Lift up the vehicle
3. Replace rear main reducer gear oil
(a). Unscrew the rear main reducer filler bolt.
(b). Unscrew the rear main reducer drain plug
and drain the gear oil.
NOTICE:
The drained gear oil shall be properly collected
and treated as regulated.
(c). Once completely drained, tighten the drain bolt.
Torque : 38~45N•m
NOTICE:
Before installing the drain bolt, clean the dirt on
the drain bolt and apply some thread sealant.
Page 1144
