Page 1370 - Foton Workshop Manual - Aumark (BJ1099)

42-6 SUPPLEMENTAL RESTRAINT SYSTEM - DRIVER AIRBAG

6. Install new driver airbag assembly
(a). Connect airbag harness connector.
WARNING:
• Never use any airbag part removed from another
vehicle. Make sure to use new parts whenever
the replacement is required.
• If the driver airbag assembly ever drops onto
the ground or upon detection of cracking, dent
or other defect on the housing, make sure to
replace with new parts.
• During operations, make sure to pull the airbag
harness and ensure that the harness is free of
interference with the surrounding parts.
NOTICE:
It indicates that the harness connector is properly
installed when a "click" sound is heard.

(b). Install the airbag driver assembly onto the
steering wheel.

fuwx42006

(c). Check the driver airbag assembly.
WARNING:
• Make sure that the driver airbag is free of
interference with the steering wheel.
• Ensure the uniform gap between driver airbag
and steering wheel.

fuwx42007

Page 1370