Page 1374 - Foton Workshop Manual - Aumark (BJ1099)

42-10 SUPPLEMENTAL RESTRAINT SYSTEM - DRIVER AIRBAG

(c). Screw in 2 bolts into the bolt holes of the
driver airbag assembly.
WARNING:
• Tighten the bolts with hand.
• Do not tighten excessively.
• The bolts shall be long enough.

(d). Connect the special tool with the driver
airbag assembly.

(e). Prepare one wheel and tire assembly with
steel rim and place it on a level ground.
(f). Use cables to bind the driver airbag
assembly onto the steel rim.
DANGER:
• Ensure that the front face of the driver airbag
assembly faces upward.
• Ensure that the driver airbag assembly is
securely bound without any looseness.
NOTICE:
• Use 3 cables to securely bind the left and right
sides of the driver airbag assembly respectively
and bind twice respectively.
• The cables shall be thick enough.
• Pass the connecting wires of the special tool through
the hole on the rim and keep loose the wires.

Page 1374